AUCTION TIME: 10:00 A.M. (CST)
AUCTION DATES: Tuesday & Wednesday, September 18 & 19
AUCTION Site: 1900 Gulf St., Lamar, MO
INSPECTION: Monday September 17, From 8:00 A.M. to 4:00 P.M. & Morning of Sale From 8:00 A.M. to 10:00 A.M.

TERMS: $500 refundable cash deposit; payment by cash, cashier’s check, business check with bank letter of guarantee; 25% due upon award; 10% buyer’s premium. (On-line bidders subject to a 13% buyer’s premium.) On-line bidders are required to register as per instruction on the web site. Certain items are subject to prior sale.

BID ON-LINE VIA YOUR PC: If you are unable to attend the auction, register today and bid from the convenience of your home or office. All items up for bid will be displayed via the internet and your bid will be received in real time along with the other attendees at the auction site.

FOR MORE INFORMATION, contact A Great American Representative:
818-884-3737, ext. 340 or Email: rgamityan@greatamerican.com

LAMINATING LINES
1999 Hymmem Thermo Lamination Line Type CTK 1600: Nominal Width 1600mm • Coating Width 1570mm • Feed Speed 5-45 M/Min. • Work Piece Dimensions Length: 1550mm To 3683mm, Thickness: 6mm To 32mm, Width: 1244mm To 1550mm • Board Types: Particle Board, Mdf, Straw Panels, & HDF • Complete W/ Infeed Unstacking System & Outfeed Stacker, Purchased New for Over $1,500,000 • S/N 166.219

Harlan Fiber Board Lamination Line: 60" Wide Capacity • 75 To 85 Feet Per Minute Nominal Operating Speed • Destacker System • Board Cleaner • Black Brothers Glue Roll Applicator, S/N 168099 • Electric Lamp Conveyor Oven, Adjustable Height; Top & Bottom Laminate Paper Stations, 2-Roll • Top & Bottom Catalyst Roll Applicators [Applied To Paper] • (3) Hot Nip Rolls, Hot Oil Type, Top & Bottom Configuration • Stacker • Pumps • Drives • Material Handling Hoist, Purchased For Over $400,000 (Rebuilt 2001)


CNC MACHINING CENTER/POINT-TO-POINT BORERS

1998 Weeke MDL. Bp-155, Table 44” X 170”, (1) Router 4/5KW, 15 Boring Spindles Both “X” & “Y” Axis, (2) Double Sided Horizontal Boring Heads In “X” Axis & (1) In “Y”, 30 Position Tool Changer, (8) Pod Rails W/ Two Pods Each, Includes One 4-Sided Horiz. Aggregate, S/N 0-250-05-2647

Biesse MDL. Rover 336 Point To Point Borer, Table 52” X 120”, (3) Routers 9.4HP; 12,000 Rpm, One Router Head Has Horizontal Router Aggregate W/ Four Spindles, 12 Boring Spindles Both “X” & “Y” Axis, (3) Double Sided Horizontal Boring Heads In “X” Axis & One In “Y”, (8) Pod Rails W/ Three Pods Each, S/N 51058
1994 Biesse MDL. Rover 346 Point To Point Borer, Two (2) Routers, 19 Vertical Spindles In “Y” Axis, 12 Vertical Spindles In “X” Axis, Two (2) Double End Horizontal Boring Heads “Y” Axis & (3) Double End Horizontal Boring Heads “X” Axis, Tool Changer, Vacuum Pump, S/N 41061

FLAT EDGE STRIP LINE (NEW IN 2001)
CONSISTING OF:
• Schelling Dual Sided Vacuum Loader
• Schelling Panel Saw Type FS430 Rip Cut Saw
• Ima Mdl. Combima/II/845/F Combination Double End Tenoner/
Edgebander, S/N 13350
• Schelling Crosscut Panel Saw
• Schelling Stacker/Accumulation Machine
• (2) Montgomery Mdl. 26HD40-HZF Horizontal Feed Wood Hogs
• Purchase Price Over $3,000,000.00

Complete specifications and drawings available on the Great American web site: www.greatamerican.com

CNC MACHINING CENTER/ROUTER, EDGEBANDERS

(3) 1998 Homag MDL. Baz 20/70/16/2k, Approx. Working Area 288” X 69” Dual Headed Machine Each W/ Routing, Drilling, Edgebanding Six Position Edgebanding Magazine, 70 Atc, 18 Rails For Vacuum Pods, Scrap Removal Conveyor, S/N’s 0-201-08-2961, 0-201-08-2958, 0-201-08-2964

(2) 2000 Homag MDL. Baz 32/50/K Optimat, Approx. Working Area 226” X 51”, Single Head Machine W/ Routing, Drilling, Edgebanding, Three Position Edgebanding Magazine, 20 Position Tool Changer, 10 Rails For Vacuum Pods, Scrap Removal Conveyor, S/N’s 0-201-08-4152, 0-201-08-4228

CNC ROUTERS

2001 CMS MDL. Pf/6b-A3-8tcs, Twin Table CNC Router, Table Size: 85"(X Axis) X 122"(Y Axis) Each, 8 Router Heads 13KW (17.5HP) Each Water Cooled, 4 EATA Radiators To Cool Water, GE Fanuc Series 160i-M CNC Control, S/N 2473

1996 Heian MDL. Zr-442pf-R4, 4-Heads 7.5/8.8KW Motors W/ Piggy Back Drills (Five Independent Drill Units Each), Twin Tables: 63" X 102" Vacuum Beds, Fanuc CNC Control, S/N 9600607-H24577

Shoda MDL. Nc-516p1330 Dual Table CNC Router, Each Table 51” X 102”, (4) Router Heads (10HP) Each, Fanuc Series 11m Controller, S/N 874701

EDGEBANDERS

1999 Homag MDL. Kl77/A3/S2 Optimat, CNC Single Sided Edge Bander, W/ Homatic MDL. NC 21 Control, Double Banding Feed Magazine, End Trims, Top & Bottom Trim, Super Finish Top & Bottom Trim, CNC Corner Rounding, Scraping, Buffing, S/N 0-200-15-1792

2000 Ima MDL. Combima/K/Ii/1075/F Double Sided Combination Machine, Universal Jump Cope, Top & Bottom Trims, Six Band Magazine Feed, Gluing Section, End Trims, Top & Bottom Trim, Top & Bottom Trim, Corner Rounding, Scraping, Smoothing, Top & Bottom Buffing, Staining, S/N 13334

1997 Ima MDL. Combima/K/Ii/R75/1035/F/R3 Double Sided Combination Machine, Universal Jump Cope, Top & Bottom Trims, Six Band Magazine Feed, Gluing Section, End Trims, Top & Bottom Trim, Top & Bottom Trim, Corner Rounding, Scraping, Smoothing, Top & Bottom Buffing, Staining, S/N 13217

1999 Ima MDL. Combima/K/Ii/R75-2:1/935/V/R3 Combiform, Cnc Controlled Contour Edgebander, (4) Milling Units 7.5KW W/ Ac Servo Drive Motor For Infinite “X” & “Y” Axis Adjustment, Shaped Edgebanding For Contours In Throughfeed Operation, Gluing Station W/ Dual Coil Magazine, Pressure Section, End Trimming Units, Top & Bottom Flush Milling Units, Infeed Conveyor 8’ X 10’ Wide W/ Adjustable Fence, S/N 15034, Purchased New For Approximately $1,000,000.00

1997 Ima MDL. Combima/K/Ii/R75/975/V/Vr3, Combiform, Cnc Controlled Contour Edgebander, (4) Milling Units 7.5KW W/ Ac Servo Drive Motor For Infinite “X” & “Y” Axis Adjustment, Shaped Edgebanding For Contours In Throughfeed Operation, Gluing Station W/ Dual Coil Magazine, Pressure Section, End Trimming Units, Top & Bottom Flush Milling Units, Infeed Conveyor 60” X 80” Wide W/ Adjustable Fence, S/N 15015 (Purchased New For Approximately $1,000,000.00)

1994 Homag MDL. Kf20/14/Qa/25 Double Sided Combination Machine, Universal Cope 3/5KW, Top & Bottom Trims 3/4.4KW, Universal Cope 3/4.4KW, Gluing, Dual Band Magazine, End Trim, Top & Bottom Trim, Staining, Right Side Adjusts, Opening 130” X 48” Infeed, Padded Chain 3” Wide W/ Pop-Up Dogs, S/N 0-202-08-1675

1990 Homag MDL. Kl74/A Single Sided
1991 Homag MDL. Fkr79/01/E Single Sided Combination Machine
1993 Homag MDL. Ffl54/11/Qe/2+500 Single Sided Combination Machine
1993 Homag MDL. Kf64/11/De/25/2+5 Double Sided Combination Machine
1993 Homag MDL. Kfl52/10/Pu/2+500 Single Sided Combination Machine
Homag MDL. Kl85/A/25 Double Sided
Homag MDL. Kl85/A/25 Double Sided
Homag MDL. Kl 74/0 Single Sided Edge Bander
Homag MDL. Kf62/6/A/101 Double Sided Combination Machine
Homag MDL. Kf63/6/A/2s/2 Double Sided Combination Machine
Delmac MDL. Dmg-50cb Contour Edge Bander
1993 Homag MDL. Kf 62/04/Qa/15/1 Double Sided Combination Machine
1993 Homag Mode Kf 63/04/Aq/25/2+100 Double Sided Combo Machine
1991 Homag MDL. Fkl77/4 Single Sided Combination Machine
Homag MDL. Kl85/A/15 Double Sided

Panel Saws

2000 AntHon MDL. Lnb135/375 Panel Saw, Capacity 53” X 6” High, Dual Infeed 4’ X 8’ X 52” High Stacks, S/N 00.1.026

AnHton MDL. Lnc/Lnc200-37.5/16.5 CNC Angular Panel Saw, 8" Stack Height Capacity, W/ Feed Conveyor, Floor Mounted, Power Roller Type, 60" Wide, Transfer Conveyor W/ Elevated Lift, Vacuum Pad Board Transfer System, Dunnage Rack, Board Pusher, Rip Saw, Transfer Conveyor, Cross Cut Saw W/ Board Pusher, Discharge Conveyor, Operator's Control Console

AntHon MDL. Lnb 150 37/37, Rear Load Panel Saw, 12’ Cutting Capacity X 22’ Infeed, Air Floataion Tables In From, Two Stacking Areas Each W/ 4’ X 12’ Sissors Lift

1999 Giben MDL. 17 Sp1cnc Angular Panel Saw System, S/N, 009.98.400

1999 Giben MDL. Prismatic 301st Crosscut Panel Saw, 36” Capacity, Air Floatation Table 20” Wide X 11’, S/N 866.98.100

1995 Giben MDL. Prisma3sp Cnc Panel Saw, Rear Load 4", W/ 5' Wide X 25' Long Power Roller Floor Conveyor, Feed Conveyor, Elevating Lift, Transfer Table, W/ Board Pusher, Rip Saw, MDL. Ws2001/V14 Cnc Control, Air Tables, S/N 699-93-380

1991 Giben MDL. 19.P10s Angular Panel Saw, 12’ Rip Capacity, 5’ Crosscut Capacity, S/N 056.91.570

Giben MDL. 2000spt Rear Load Panel Saw, 14’ X 10’ Capacity, S/N 450-9-337

Giben MDL. 2000sp Mos256 Front Load Panel Saw, 12’ X 12’ Capacity, Four (4) Front Air Floatation Tables, (8) Grippers On Back Fence, Side Alignment Device, S/N 380.7.523

Holzma MDL. Hcl 21-38-16, 14’ X 68” Capacity Angular System, Rear Infeed Lift MDL. Ht-W, Scoring Saw Motor1.1KW, Main Saw Motor 18KW, Edgings Chopper Type Kappautomat 270, Serial No. 931043 Hydraulic Guillotine 10” Wide, Crosscut Saw 68” Capacity W/ 1.1KW Score Motor & 18KW Main Motor, (2) Air Floation Tables In From 24” X 105”, Controller 3-406-16-3110

1993 Holzma MDL. Hcl 21-38-16, 14’ X 6’ Capacity Angular System, Rear Infeed Lift MDL. Ht-W, Scoring Saw Motor1.1KW, Main Saw Motor 18KW, Edgings Chopper Type Kappautomat 270, Hydraulic Guillotine 10” Wide, Crosscut Saw 72” Capacity W/ 1.1KW Score Motor & 18KW Main Motor, (2) Air Floation Tables In From 24” X 105”, S/N 932 32 Os

Rodgers MDL. 707-Hovf Horizontal Manual Beam Saw, 48” Capacity, Scoring Saw Motor 1HP, Main Saw Motor 10HP, Hydraulic Unit For Traverse 2HP, Equipped W/ 10’ Tigerstop Gauge, S/N 8140

MODERN SOPHISTICATED BORING MACHINES

Nottmeyer MDL. Sp/N1 Feed Through Boring Machine, Left & Right Side Horizontal Boring Heads, (6) Veritcal Boring Units From Bottom, (2) Vertical Boring Units From Top, (6) Overhead Pneumatic Holddown Clamps: S/N 20709 (New In 1998), S/N 20581 (New In 1997), S/N 20582 (New In 1997), S/N 20584 (New In 1997), S/N 20585 (New In 1997)

Nottmeyer MDL. Nb95 Feed Through Boring Machine, Left & Right Side Horizontal Boring Heads, Six (6) Veritcal Boring Units From Bottom, Two(2) Vertical Boring Units From Top, Six (6) Overhead Pneumatic Holddown Clamps: S/N 20887, S/N 20888, S/N 20889, S/N 20890, S/N 20891, S/N 20892, S/N 20887, S/N 20888, S/N 20893, S/N 20894, S/N 20895, S/N 20896, S/N 21143, S/N 21144 (ALL NEW IN 2000)

Nottmeyer MDL. Super Sp/N-1 Double Sided Horizontal Feed Through Boring Machine, Four Motor On Each Side, 30” Opening: S/N 20580, S/N 20583 (New In 1997)

Biesse MDL. Techno Logic Feed Through Boring Machine, Left & Right Side Horizontal Boring Heads 20 Spindles Each, (6) Veritcal Boring Units From Bottom W/ Two 1.8HP Motors & Swivel Mount Heads Each, Three (3) Vertical Boring Units From Top W/ Two 1.8HP Motors & Swivel Mount Heads Each, (6) Overhead Pneumatic Holddown Clamps: S/N 3168 (New In 2000), S/N 3212 (New In 2000), S/N 63382 (New In 1997), S/N 63383 (New In 1997), S/N 63315 (New In 1996), S/N 63318 (New In 1996), S/N 93-0333, S/N 93-0334, S/N 93-0335, S/N 93-0336, S/N 93-0337, S/N 93-0338, S/N 93-0339, S/N 93-0340

Biesse Short Part Boring Machines MDL. Techno Logic Feed Through, Left & Right Side Horizontal Boring Heads 20 Spindles Each, (6) Veritcal Boring Units From Bottom W/ Two 1.8HP Motors & Swivel Mount Heads Each, (3) Vertical Boring Units From Top W/ Two 1.8HP Motors & Swivel Mount Heads Each, (6) Overhead Pneumatic Holddown Clamps, Equipped W/ Hopper Feed & Return Conveyor: S/N 63393 (New In 1996), S/N 63381 (New In 1996), S/N 94.0570 (New In 1994), S/N 94.0553 (New In 1994), S/N 94.0549 (New In 1994)

FOIL MACHINES

1997 Fletcher MDL. Fm200d Double End Tenoner/Foiler, Capacity 72" X 48", Stations Each Side: Top & Bottom Trims 10HP Each Bottom Unit Jumps, High-Speed Jump Copes 10HP, Long Belt Sanders 3HP Each, Brush Unit, (2) Foiling Stations, (2) Brush Units, Feed Motor 5HP, Padded Chain, S/N 97200d-3

1991 Fletcher MDL. Fm200d Double End Tenoner/Foiler, Capacity 72" X 48", Stations Each Side: Top & Bottom Trims 10HP Each Bottom Unit Jumps, High-Speed Jump Copes 10HP, Long Belt Sanders 3HP Each, Brush Unit, Two (2) Foiling Stations, (2) Brush Units, Feed Motor 5HP, Padded Chain, S/N 91200D-7

1990 Fletcher MDL. Fm200d Double End Tenoner/Foiler, Capacity 72" X 48", Stations Each Side: Top & Bottom Trims 10HP Each Bottom Unit Jumps, High-Speed Jump Copes 10HP, Long Belt Sanders 3HP Each, Brush Unit, (2) Foiling Stations, (2) Brush Units, Jump Dado Motor 20HP, Feed Motor 5HP, Padded Chain

Berg Profiltechnik Profile Moulding Wrapper, MDL. Uaf330mp500, S/N 110005

Fritz MDL. Pu45s Profile Moulding Wrapper, S/N 0271020010

GRINDING EQUIPMENT

Utma MDL. Lc25 Nc3, Cnc Tool & Cutter Grinder, "Utma Electronic" Programmable Logic Type Control, 3-Axis Cnc Tool & Cutter Grinder W/ Swiveling Wheelhead, Z-Axis Longitudinal Table Travel, X-Axis Table Cross Travel, Pulse Feed Hand Wheel, Motorized Wheelhead, Manually Indexing Workhead

(2) 1997 Vollmer MDL. CHP 025 Automatic Carbide Saw Blade Grinder, Cnc Controlled, S/N’s, 1471 & 1483

1998 Vollmer MDL. Chc 025 Automatic Carbide Saw Blade Grinder, Cnc Controlled, S/N 3281

Weinig MDL. R931 Profile Grinder, 9” Capacity, Motor 1HP, Water Coolant Tank & Pump, S/N 893/1022

GANG RIP SAWS

Mereen-Johnson MDL. 424-Dc Dip Chain Gang Rip Saw, 24" Wide Capacity, Arbor Motor 75HP, Feed Motor 3HP, Double Upper & Single Lower Kickback Fingers, Outfeed Kickback Fingers, Pneumatic Holddown Pressure, Sound Endclosure

Progressive Systems Roll Feed Gang Rip Saw, 31” Wide Capacity, Arbor Motor 50HP, Feed Motor 3HP, Double Upper & Single Lower Kickback Fingers, MotorizedRaise/Lower Of Arbor

MOULDERS

1997 Weinig MDL. Unimat 23 Seven Head Moulder, Capacity: 9” X 5”, Head Configuration: Bottom 15KW, Top 11KW, Right Side15KW, Left Side 22KW, Right Side 11KW, Top 22KW, Bottom 18.5KW, Hopper Feed, Two Meter Infeed Table, Feed Motor 8.6KW, S/N 023-2763

1993 Weinig MDL. Unimat 23 Six Head Moulder, Capacity: 9” X 5”, Head Configuration: Bottom 7.5KW, Right Side 11KW, Left Side 11KW, Right Side 11KW, Top 18.5KW, Bottom 15KW, Spindle Diameter 1-13/16”, Feed Motor 5.5KW, S/N 023-909

1991 Weinig MDL. U17a Five Head Moulder, Head Configuration: Bottom, Right Side, Left Side, Top, Bottom, 7” X 5” Capacity, S/N 1369-2156

WOOD GRINDERS/HOGS

Retech MDL. Rg62 Wood Waste Grinder, 150HP Motor, Mounted On Welded Structural Steel Stand, W/ Top Mounted Welded & Bolted Steel Feed Hopper, Approximately 8' X 10' X 3' Deep, Rubber Belt Exit Conveyor, Approximately 2' Wide X 18' Long, S/N 12 99 62 130 150/857078

Montgomery MDL. 34hd40-Hzf Horizontal Feed Blow Hog, 125HP Motor W/ Vibrating Conveyor, S/N 2810

Montgomery MDL. 18hd50-Hz50bh Horizontal Feed Blow Hog, 100HP Motor W/ Vibrating Conveyor, S/N 1965

Montgomery MDL. 18hd40-Hzbh, Horizontal Feed Wood Hog, 75HP Motor W/ Vibrating Conveyor, S/N 1835

Zeno Horizontal Wood Grinder 18.5KW W/ Vib. Conveyor

2000 Weima MDL. Wl6sm Horizontal Wood Grinder, 40HP Motor, S/N 500-4740

FEEDERS, STACKERS, PANEL TURNERS

2000 & 1993 Bargstedt Type Tsh 22/D/25/12/S Panel Stacker

1993 Bargstedt Type Tsh 20d Panel Stacker

(2) 1993 Bargstedt Type Td11 Panel Turners, New In 1993

(2)1993 Bargstedt Type Td21 Panel TurnerS New In 1993

1996 Homag MDL. Td31/25/25/12/12/L Panel Turner, S/N 0-205-08-2463

2000 Homag MDL. Td51/25/12 Panel Turner, S/N 0-205-08-4390

1997 Rbo MDL. Tornado Sc/D 1300 Stacker, 4’ X 8’ Capacity, S/N 97030 Panel Turners

Sergiani Panel Turners, MDL. Gp1 & Gp2

1997 Wemhoner Type W186 Double Sided Vacuum Feeder/ Stacker W/ Two(2) Leweco 3500kg Scissors Lifts W/ 4’ X 11’ Power Rolls On Top, S/Ns, 16 & 18

1997 Wemhoner Type W286 Double Sided Vacuum Feeder/Stacker 4’ X 8’ S/N 29

1997 Wemhoner Type W284 Double Sided Vacuum Feeder/Stacker 4’ X 12’, S/N 190

1997 Wemhoner Type W169 Panel Turner, S/N 351

MISCELLANEOUS WOOD EQUIPMENT

Altendorf MDL. F-90 Sliding Table Saw, Sliding Table 126” X 10”, Main Table 58” X 48”, Overhead Guard, S/N 95-7-14

Automac Four Head V-Groover, 10HP Motor Each, 36” Capacity, Feed Motor 2HP Variable Speed

Black Brother 60” Top & Bottom Glue Spreader

Brevetti MDL. C-16 Double Miter Saw (Four Available)

Brevetti MDL. Aut 82 “V” Nailers (Three Available)

Carlson Systems MDL. D84 Drawer Box Clamp/Nailer, S/N 84958113

Delta MDL. 15-127 Radial Arm Drill Press, Table 30” X 22” W/ Trough, Tilting Head, Motor 1/2HP; 3ph, S/N 99k85502

Delta MDL. 70-200 Drill Press 20”, Table 16” X 18” W/ Trough, Motor 1HP; 1ph, S/N 0050

1999 Gomad MDL. Dffa-6 Tilting Spindle Shaper, Table 40” X 40” W/ Miter Slot, Adjustable Fence 6” High, New 1-1/4” Spindle & Router Collet In Box, S/N 835

Newman MDL. Hp800 Embossing Press 30” X 80” Heated Platens, 800 Ton Capacity, Hydraulic Pump Motor 30HP, S/N 14783 (Two Available)

Pistorius MDL. Hm-4-S Four Head Hauncher, Each Arbor Is 4” Wide W/ A 7.5HP Motor, Head Are Adjustable Along 10’ Track, Outside Heads Each Have Pistorius 2g Accurcut Gages 4’ Capacity, Pneumatic Foot Pedal To Cycle, Pneumatic Holddown On Each Head, S/N 189600

Powermatic MDL. 1200, 20” Drill Press Variable Speed, S/N 8620v315

Scmi MDL. R-9 Overarm Pin Router

Sweed Bundle Turner 5’ Deep X 30” High Stacks, Open Ended

Tannewitz 20” Bandsaw, Tilting Table 19” X 25” W/ Guide Fence & Miter Gauge, 2.5HP; 1ph Motor

Timesavers MDL. 364-2hd, 64” Wide Two Head Wide Belt Sander, Two 11.5” Diameter Rubber Contact Drums 60 & 40HP, Shoe Type Holddowns, Belt Size: 64” X 103”, Hydraulic Feed 7.5HP Pump, Air Tracking, Accurate Technology Proscale For Thickness Indicator, 48” Lay-Up Area, S/N 22750

Tyler Pod Press 5’ X 12’ W/ Four Platens 5’ X 3’ Each, Adjustable Daylight Opening Motorized, S/N 971-70

Whirlwind MDL. 1000r Up-Cut Type Cut-Off Saws, 5HP Motors, 14” Diameter Blades, Right Hand Saws, 12’ Infeed Tables, 8’ Outfeed Tables (4 Available)

FORK TRUCKS, BATTERIES, & CHARGING STATIONS

(9) 2000-1999 Baker H45d-600-03 Lift Trucks, 10,000-Lb Capacity, Diesel Fueled

(38) 2000 Baker H30d-03 Lift Trucks, 6,000-Lb Capacity, Diesel Fueled

(46) 2004-1999 Yale ERC060ZGN48TE084 Lift Trucks, 6,000-Lb Capacity, Electric Powered

(4) 1993 Clark Lift Trucks, 6,000-Lb Capacity, Propane Fueled Engine, 7' High 3-Stage Mast, 42" Long Forks, Power Fork Spreader, Roll Over Protection System

(2) Lift Truck Battery Charging & Servicing Stations: (21) MTC Storage & Charging Racks, Approximately 6' Wide X 3' Deep X 7' High, (1) MTC Battery Lift & Shuttle Cart, (1) MTC MDL. H20-150ss Water Recirculation System, S/N 58131, Stainless Steel, 150-Gallon Capacity, W/ Wash Station

AERIAL LIFTS

2004 Genie Z-30/20n, S/N Z30n04-6653, Articulating "Z" Boom Lift, Self-Propelled, Electric Powered, 500-Lb/227-Kg Rated Workload, (2) Maximum Platform Occupants, 30' Maximum Platform Height, 21' Maximum Platform Reach, Cushion Tires, W/ Self-Contained Battery Charger

1999 Genie Z-20/8n, S/N 1087 Articulating "Z" Boom Lift, Self-Propelled, 400-Lb Maximum Load Capacity, 2-Occupant Maximum, 20' Maximum Platform Height, 8' 8" Maximum Platform Horizontal Reach, Cushion Tires, Control

1995 Genie Z-30/20hd, S/N 30-Z30-3041, Portable Manlift, 500-Lb Maximum Load Capacity, Self-Propelled, Electric Powered, Telescoping Boom Type, 2 1/2' X 3 1/4' Basket, Top Control, 31' Maximum Lift Height

Skyjack, Sjkb-33n, Articulating "Z" Boom Lift, Self-Propelled, Electric Powered, 500-Lb Capacity, Pneumatic Tires

BOX CAR MOVER

1993 Trackmobile, ModeL TM4000 w/Detroit 4-53T, Diesel Engine, Clark Transmission, 5,212 Hours

ENGINEERING LABORATORY

L.A.B. MDL. Accudrop160/Ad-160-72 Test Stand, S/N 10640163
L.A.B. MDL. 400of Test Stand, S/N 501045
Sears/Craftsman MDL. Contractor Series 3HP Table Saw
Dillon MDL. LW Dynamometer, S/N 4778, 500-Lb Capacity
Grizzly Drill Press, S/N 10643, Floor Type, 34" Swing, 5/8" Chuck Size
Chatillon Industrial Scale, Portable Platform, 1,000-Lb Capacity
Custom Manufactured Furniture Stress Test Machine, Heavy Duty Aluminum Frame, W/
Associated Sand Filled Test & Weight Bags, Allen-Bradley MDL. Panelview 300
Programmable Logic Control
Hydraulic Actuated Tilt Table, Approximately 34" X 84", W/ Md Smartpull Digital
Controller Utility Carts; Hydraulic Pallet Jacks

GENERATOR

1997 Caterpillar Olympian 2031787, Stand-By Emergency Power, 125-KW, Skid Mounted, Diesel Powered

TRACTORS, ROLL OFF TRUCK, TRAILERS,
PICK UPS, VANS, & CARS

2003 Kenworth 300 truck Tractor, Diesel Engine
1991 International 8100 Truck Tractor, Single Axle, Diesel, 9-Speed Transmission
1995 Ford Ln8000 Truck Tractor
1992 International 4900 Truck, 2-Ton Capacity
1992 International F8200 Truck Tractor, Tandem Axle
(3) 1986 Fruehauf Dry Van Trailer, 48', Tandem Axle, Rear Swing Out Doors
(2) 1987 Lufkin Dry Van Trailer, 48', Tandem Axle, Rear Swing Out Doors
1988 Strick Dry Van Trailer, 48', Tandem Axle, Rear Swing Out Doors
1989 White GMC WX Truck Roll-Off, Cab Over Engine, Tandem Axle, W/ Cummins LTA10-240PT Diesel Fueled Engine, Allison MT-654CR Transmission
1990 Chevrolet G-2500 Cargo Van

1997 Dodge Grand Caravan Mini Van
1995 Chevrolet S-10 Pick-Up Truck
1981 Chevrolet C-1500 Pick-Up Truck

WAREHOUSE EQUIPMENT
Pallet Racking; (40) Pallet Storage Rack Sections, Multi-Tier, Approximately 13' X 4' X 18' High; (80) Pallet Storage Rack Sections, Multi-Tier, Approximately 8' X 4' X 10' High; Hytrol Live Roller Belt Conveyor, Approximately 2' Wide X 60' Long; (8) Gravity Roller Conveyor Sections, Each Approximately 2' Wide X 10' Long; (7) Cantilever Rack Sections, Double Sided, Approximately 6' High X 12' Long; (4) Towable A-Frame Carts, Approximately 3 1/2 X 12, Pneumatic Tires; (750) Rack Sections, Stacking Type; Flow Through Shelving; Flatbed Carts; Etc.

(60) SCISSOR LIFTS

OFFICE FURNITURE & BUSINESS MACHINES
Executive, Jr. & Secretarial Office Furniture, Seating, Conference Sets, 100’s Of Computers & Monitors, Laser Jet Printers, Label Makers, Fax Machines, Phone Systems and so much more!

RAW MATERIALS
Racks of veneer woods in a variety of finishes • Particle Board • Finished Lumber and much more!